![]() ![]() ![]() If you plan on having a strong connection to the aircraft or require the most accurate models possible, we recommend using the Active Connect mode. Older aircraft like the Phantom 4 and Inspire 1 use timed imaging.Īctive Connect mode will create more accurate 3D models since all of its images are taken while traveling the same speed, but Connectionless mode doesn't require a connection to the app. Timed imaging is the only option available on aircraft such as the Phantom 4, Phantom 3 and Inspire 1.ĭistance Triggering is only available on Phantom 4 Pro/Mavic aircraft or newer. ![]() Timed imaging is OK but it will take lot of images in the corners when the aircraft slows down and this can lead to processing issues. Distance Triggering leads to better results and is used if it is available. Timed imaging is dumb and just takes an image every X seconds. Distance triggered will take a picture every time the aircraft has moved the prescribed amount of distance. NOTE: There are two types of Connectionless Mapping: timed and distance triggered. As of Map Pilot version 2.3.0, a mapping mode that does not require an active connection to the aircraft as been added.Ĭonnectionless Mode is designed for use when mapping will occur far away from the home point or if there is a lot of interference that would keep the camera from triggering properly using Active Connect mode. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |